Eng Rus Fin
Компания | Новости | Продукция | Запчасти | Контакты

Нарезчики швов

Husqvarna FS 4800 D

← Обзор моделей | Следующая модель →

The FS 4800 D is a professional and very versatile floor saw for mid-size jobs. It is available in front pivot or rear pivot configurations. A rear pivot saw is recommended when manoeuvrability is key in road repairs jobs. The front pivot version is preferable for normal road sawing operations. The FS 4800 D can be equipped with a 3-speeds gearbox. This allows to run blades of different sizes without having to change other parts. A special color coding on the gearbox, the control panel and the tachometer, garanties that the correct RPM is applied to the blade. Available on both the front and the rear pivot versions.

Other features

  • The Quick Stick™ one-hand control is used for drive, control and raising and lowering the blade.
  • Our larger road saws are equipped with powerful turbo diesel engines, and are designed to provide more power at the blade spindle, which increases efficiency in all kinds of sawing job. The engines also have low vibration levels, for more comfortable operation.
  • All our saws have a compact and well-balanced design with a low profile that makes them easy to handle and transport.
  • Blade clutch allows engine operation and saw movements without blade rotation and assists in freeing blades stuck in cut.
  • The IntelliSeal blade spindle (patent pending) has four sealed radial bearings for strength and durability. Allows for a minimum of 500 hour maintenance intervals and a 1000 hour limited warranty.
  • Yanmar 48 hp 4-cylinder turbocharged, liquid-cooled, diesel engine.
  • 12 belts from engine to blade.
  • The front pivot version has a patent-pending electric tracking system, allowing adjustments while cutting. The rear pivot version is equipped with an electrically controlled hydraulic differential system locking rear wheels for positive traction to prevent slipping.
  • Fully equipped control panel.
  • Thanks to a very efficient transmission (12 belts from engine to blade), these saws offer a big 42 hp at the blade spindle, for high cutting speed and capacity.

Technical Data

Motor manufacturer Yanmar 
Motor spec TNV88
Max output 35 kW / 48 hp
Cylinder bore 88 mm
Fuel tank volume 29,5 lit
Air filter type Multi stage
Engine cooling Liquid /Air

Cutting equipment
Output RPM 3000 rpm
Diamond blade, max 750 mm
Max cutting depth 300 mm
Spindle diameter 25,4 mm
Blade shaft diameter 51 mm

Axle front 25,4 mm
Rear axle type hydraulic
Transmission speed 0-70 m/min

Weight 730 kg

Sound and noise
Sound power level, LWA 113 dB(A)
Sound pressure 91 dB(A)

Hand arm vibration (Aeq) < 3,6 m/s²

Article #

DescriptionDiamond blade, max


FS 4800D

450 mm


FS 4800D

450 mm


FS 4800D

660 mm


Контроль по горизонтали
Контроль сырья
Контроль зажигания
Одноходные виброплиты
Реверсивные виброплиты
Список запчастей
Geo Fennel
Лазерные уровни и построители точек
Автоматические лазерные построители
Электронные угломеры и уклономеры
Приемники лазерного луча
Геодезические приборы
Лазерные дальномеры
Системы терморегулирования
Системы контроля зажигания
Нарезчики швов
Ленточные станки и пилы
Камнерезные станки/пилы
Ленточные станки и пилы
Прочяя продукция ZAGRO
Ручные резчики
Камнерезная пила
Электрический плиткорез
Нарезчики швов
Компактные нарезчики швов
Single Width
Две ширины
Нарезчики швов
Oтбойные молотки
Project by Pro.Name
Web-Technologies by Petroffs
PR-Konetuonti OY
Lentokentäntie 34
Tel. +358 (0) 1 047 07400
Fax. +358 (0) 1 047 07408